Casting is a manufacturing process in which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify. The solidified part is also known as a casting, which is ejected or broken out of the mold to complete the process. Casting materials are usually metals or various cold setting materials that cure after mixing two or more components together; examples are epoxy, concrete, plaster and clay. Casting is most often used for making complex shapes that would be otherwise difficult or uneconomical to make by other methods.
Casting is a 6000-year-old process. The oldest surviving casting is a copper frog from 3200 BC.
In metalworking, metal is heated until it becomes liquid and is then poured into a mold. The mold is a hollow cavity that includes the desired shape, but the mold also includes runners and risers that enable the metal to fill the mold. The mold and the metal are then cooled until the metal solidifies. The solidified part (the casting) is then recovered from the mold. Subsequent operations remove excess material caused by the casting process (such as the runners and risers.
In metalworking and jewellery making, casting is a process in which a liquid metal is somehow delivered into a mold (it is usually delivered by a crucible) that contains a hollow shape (i.e., a 3-dimensional negative image) of the intended shape. The metal is poured into the mold through a hollow channel called a sprue. The metal and mold are then cooled, and the metal part (the casting) is extracted. Casting is most often used for making complex shapes that would be difficult or uneconomical to make by other methods.
Casting processes have been known for thousands of years, and have been widely used for sculpture (especially in bronze), jewellery in precious metals, and weapons and tools. Traditional techniques include lost-wax casting (which may be further divided into centrifugal casting and vacuum assist direct pour casting), plaster mold casting and sand casting.
The modern casting process is subdivided into two main categories: expendable and non-expendable casting. It is further broken down by the mold material, such as sand or metal, and pouring method, such as gravity, vacuum, or low pressure.
Related Industry Knowledge
- Precautions for wearing necklaces
- What is a ring?
- The basic introduction of the ring
- The historical origins of the ring
- Ring meaning
- A ring and a wedding ring
- What are earrings?
- Earrings match
- Choice of earrings
- How to maintain earrings
- Advantages Of Stainless Steel Ornaments
- The Development Of Stainless Steel Ornaments
- The Market Characteristics Of Stainless Steel J...
- Analysis Of The Production Process Of Stainless...
- How To Maintain Earrings
- Color Selection Earrings